Chapter 4
Settings — [DISPLAY OPTION] menu
ENGLISH - 117
[0-1023]
Select this item when the DVI-D terminal output from the external device (such as computer) is input
to the <HDMI IN 1> terminal, the <HDMI IN 2> terminal, the <HDMI IN 3> terminal, or the <HDMI IN
4> terminal via a conversion cable, etc.
This is the same when the HDMI terminal output from a device such as a computer is input to the
<HDMI IN 1> terminal, the <HDMI IN 2> terminal, the <HDMI IN 3> terminal, and the <HDMI IN 4>
terminal.
Note
f
The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the
external device regarding the output of the external device.
f
The HDMI signal level is displayed for 30 bits of input.
Setting [EDID SELECT] in [SLOT IN] (HDMI input)
1) Press
as
to select [SLOT IN].
2) Press the <ENTER> button.
f
The
[SLOT IN]
screen is displayed.
3) Press
as
to select [EDID SETTING], and press the <ENTER> button.
f
The
[EDID SETTING]
screen is displayed.
4) Press
as
to select [EDID SELECT].
5) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[EDID1:4K/60p]
Switches to EDID corresponding to the 4K video signal (maximum 4 096 x 2 160 dots, maximum
vertical scanning frequency 60 Hz).
[EDID2:4K/30p]
Switches to EDID corresponding to the 4K video signal (maximum 4 096 x 2 160 dots, maximum
vertical scanning frequency 30 Hz).
[EDID3:2K]
Switches to EDID corresponding to the 2K video signal (maximum 1 920 x 1 200 dots) or lower.
Note
f
Switch the setting to [EDID2:4K/30p] when proper image is not projected while [EDID SELECT] is set to [EDID1:4K/60p] and the 4K video
signal is input.
f
Switch the setting to [EDID3:2K] when proper image is not projected while [EDID SELECT] is set to [EDID1:4K/60p] or [EDID2:4K/30p] and
the 2K video signal or lower is input.
f
For details of the signal described in EDID of [EDID1:4K/60p], [EDID2:4K/30p], or [EDID3:2K], refer to “List of plug and play compatible
signals” (
x
page 223).
Setting [EDID MODE] in [SLOT IN] (HDMI input)
1) Press
as
to select [SLOT IN].
2) Press the <ENTER> button.
f
The
[SLOT IN]
screen is displayed.
3) Press
as
to select [EDID SETTING], and press the <ENTER> button.
f
The
[EDID SETTING]
screen is displayed.
4) Press
as
to select [EDID MODE].
5) Press the <ENTER> button.
f
The
[HDMI EDID MODE]
screen is displayed.
6) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[DEFAULT]
Standard setting.
[USER]
Set the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items as EDID.
f
When [DEFAULT] is selected, proceed to Step
11)
.
