54
o
Press the ENTER button and
select the “LAMP RUN TIME” by
pressing the or buttons.
!0
Press and hold the ENTER
button for approximately 3
seconds.
The “Lamp Time Reset” will be
displayed.
!1
Select “OK” by pressing the
or buttons and press the
ENTER button.
NOTE:
• If “CANCEL” is selected in step
!0
, the operation for resetting the
lamp time will be cancelled.
!2
Turn off the power.
This will reset the cumulative
usage time for the lamp unit to
zero.
Refer to steps
e
and
r
on page
28
for details on how to turn off
the power.
t
Install the lamp unit cover, and
then use a Phillips screwdriver
to securely tighten the lamp
unit cover fixing screws.
NOTE:
• Be sure to install the lamp unit
and the lamp unit cover securely.
If they are not securely installed, it
may cause the protection circuit to
operate so that the power cannot
be turned on.
y
Insert the power cord plug into
the wall outlet and then press
the MAIN POWER switch.
NOTE:
• If the POWER indicator on the
projector does not illuminate red
when the MAIN POWER switch is
turned on, turn the MAIN POWER
switch off again and check that
the lamp unit and the lamp unit
cover are securely installed. Then
turn the MAIN POWER switch
back on.
u
Press the POWER button so
that a picture is projected onto
the screen.
i
Press the MENU button to
display the MENU screen, and
select “OPTION” by pressing
the or buttons.
OPTION
SHUTTER
INPUT DISP
AUTO KEYSTONE
RGB/YPbPr
AUTO RGB IN
RGB2 SELECT
BACK COLOR
FRONT/REAR
DESK/CEILING
LAMP POWER
LAMP RUN TIME
NEXT PAGE
↓
1820 H
OFF
OFF
RGB
OFF
INPUT
BLUE
FRONT
DESK
LOW
ON
ON
YPbPr
ON
OUTPUT
BLACK
REAR
CEILING
HIGH
SELECT:[
↑
][
↓
] ENTER:[ENTER]
ESC :[MENU]
OPTION
SHUTTER
OSD
AUTO KEYSTONE
RGB/YPbPr
AUTO RGB IN
RGB2 SELECT
BACK COLOR
FRONT/REAR
DESK/CEILING
LAMP POWER
LAMP RUN TIME
NEXT PAGE
↓
1820 H
OFF
OFF
RGB
OFF
INPUT
BLUE
FRONT
DESK
LOW
ON
ON
YPbPr
ON
OUTPUT
BLACK
REAR
CEILING
HIGH
SELECT:[
↑
][
↓
]
ENTER:[ENTER]
ESC :[MENU]
Power OFF
OK
CANCEL
Lamp Time Reset
