manualshive.com logo in svg

Panasonic PT-L730NT, Operating Instructions Manual

Share
Download
Panasonic PT-L730NT Operating Instructions Manual Download Page 18

18

t

r

e

w

q

LOCK

o

i

y

u

<Wireless card>

<SD memory card>

<Card slot>

Front

Back

q

Slot cover

Covers the card slots.

w

Wireless card slot

Insert the wireless card into here.

e

Eject switch

Use to remove the wireless card
from the card slot.

r

Access lamp

Flashes while the projector is
being accessed for reading or
writing the data in the SD
memory card.

t

SD memory card slot

Insert the SD memory card into
here.

y

Connector

This connector is for connecting
the wireless card to the
projector’s card slot. Be careful
not to touch the connector.

u

Wireless card power indicator

Illuminates when the wireless
card is operating.

i

Metal terminals

These terminals are for
connecting the SD memory card
to the projector’s card slot. Do not
touch the metal terminals with
hands or metal objects, attach
stickers to them, or allow them to
become contaminated in any
way.

o

Write-protect switch

If the write-protect switch on the
SD memory card is moved to the
LOCK position, it will not be
possible to use any file editing
functions such as deleting or
moving image files.

Summary of Contents for PT-L730NT








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands