Panasonic PT-L730NT Operating Instructions Manual Download | Manualshive

Page: 28 / 135

background image

28

Turning off the power

q

Press the POWER button. “Power
OFF” is displayed on the screen.

w

Select “OK” using the and
buttons and press the ENTER button.

The lamp unit will switch off and the picture will stop being projected. (The
power indicator on the projector will illuminate orange.)

e

Wait until the power indicator on the projector illuminates red (until
the cooling fan stops).

Do not in any way cut power to the projector while the cooling fan is still
operating. Be careful not to switch off the MAIN POWER switch of the
projector, unplug the power cord from the electrical outlet or turn off in-line
switches such as tabletop power switches.

r

Press the MAIN POWER switch to the “O” side to turn off the power.

NOTE:

• After the power is turned off, the lamp unit will take some time to cool

down. If you turn the power back on again before the lamp unit has cooled
down, the lamp unit may not turn on straight away, but it will turn on
automatically after a short period. (During this time, the power indicator on
the projector will flash orange.)

• When the projector is in standby mode (the power indicator on the

projector is illuminated red), the projector will still draw a maximum 1.7 W
of power, even when the cooling fan has stopped.

•

When the WEB STANDBY is set to “ON”, the cooling fan operates and the
power indicator on the projector flashes slowly in red and the projector
draw a maximum 43 W of power. (page

44

)

• If the MAIN POWER switch is accidentally turned off while the projector is

being used, the lamp unit may not turn on straight away after the power is
turned back on. In such cases, the lamp unit will turn back on automatically
after a short period. (During this time, the power indicator on the projector
will flash green.)

• A tinkling sound may be heard while the power indicator is turned off, but

this is not a sign of a malfunction.

• You can also turn off the power by pressing the POWER button twice.

i

Turn the focus ring and the zoom

knob to adjust the projected image
focus and size.

Zoom

Focus

Power OFF

OK

CANCEL

«
...
26
27
28
29
30
...
»

Summary of Contents for PT-L730NT








































































































































Reviews:

No comments

Related manuals for PT-L730NT

Event Master E2

Brand: Barco Pages: 2

Brand: Barco Pages: 7

ADVANTAGE ELECTROL

Brand: Da-Lite Pages: 2

Brand: HQ Pages: 2

isobar HT1210ISOCTR

Brand: Tripp Lite Pages: 4

Brand: LinQTab Pages: 23

Brand: Tripp Lite Pages: 3

Brand: Hitachi Pages: 71

IntelliClass IC-300-CSP-P

Brand: Crestron Pages: 2

Brand: Acer Pages: 63

Brand: Acer Pages: 59

Brand: Acer Pages: 67

Brand: Acer Pages: 107

Brand: Acer Pages: 93

Brand: Acer Pages: 66

Brand: Acer Pages: 61

Brand: Acer Pages: 67

Brand: Acer Pages: 61

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands