36
Various projection methods
(cont.)
Check the status indication on the launcher to make sure that transmission is
possible (check that the green lamp is lit).
2
Press the [MULTI-LIVE] button on the remote control to turn the projection screen
into a full screen display (the status when no index window is displayed).
(See page 35)
If you press the [MULTI-LIVE] button once or twice when index windows are displayed on the projection screen, the
screen will switch over to a full screen display.
1
Click [
] on the launcher.
The window shown to the right appears.
3
Select and click the projection position.
The computer image is transmitted to the selected quarter of the projection screen.
4
Switching to a different position
Select and click a different projection position in step 4 above.
Enlarged display
If [
] is clicked with a computer, projector screens temporarily change to full screen display.
To return to the original display, click [
] with the computer that click [
] and select original
projection positions with each computer.
Quitting 4-screen multi style
Select and click the checked position in step 4 above.
• In the 4-screen multi style, the computer screens from all the computers connected to the projector can be transmitted to the
projector. (If an image from another computer has been sent to the image position where an image is already displayed, the
existing image is replaced by the new image.)
• Picture quality or other options can be set on the <Option> window by clicking [
] on the launcher.
• If the connection error occurs during projection, the message [Stop “Live mode”] will appear, then restart projection by clicking
launcher buttons.
4-screen multi style
Connect up to four computers to one projector, and then divide the projector screen into four parts, and simultaneously display
the screens for the four computers on the projector screen.