18
3
In [Network], select the same network number as is displayed in the [WIRELESS
LAN] menu of the projector to connect.
Projectors powered on in the chosen network group are listed.
4
Select the desired projectors, and click [OK].
The launcher appears and the connection with the projector is established.
(“Description of the launcher”
Launcher is not displayed on the projection screen.
However, in Windows Vista, Launcher is displayed if the software is installed.
• Easy Wireless Set Up cannot be made between the projector and the computer. (See page 71)
• Automatic connection setting (See page 50)
※
1
• In the following situations, connections other than [U] are not possible.
- Not logged in with Administrator authority
- When using Windows Vista
•
Depending on the computer and wireless LAN card used, Easy Wireless Set Up may not be possible. If this is the case,
the [Network] setting of <Select Access Port> window will be switched to [U] automatically. For details of the connection
procedure, first close Wireless Manager ME 4.5, and then refer to pages 22 - 26.
※
2
•
The initial network number for both the projector and Wireless Manager ME 4.5 is [1]. These numbers must match for the
connection. To check the network number, refer to the network menu of the projector.
•
When importance is placed on security, select the network number [2] - [4], because WEP (wireless communication
encryption)
※
is set on these network numbers.
•
Important video/audio data is protected because AES
※
encryption processing takes place in advance for all network numbers,
even if [ENCRYPTION] is set to [NONE].
• Other network adapters may not be usable under Easy Wireless Set Up connections.
•
Connections to other networks connected through the wireless LAN card are broken under Easy Wireless Set Up
connections.
※
Connecting with wireless LAN
(cont.)