Chapter 4
Settings — [DISPLAY OPTION] menu
96 - ENGLISH
[DISPLAY OPTION] menu
On the menu screen, select [DISPLAY OPTION] from the main menu, and select an item from
the sub-menu.
Refer to “Navigating through the menu” (
x
page 65) for the operation of the menu screen.
f
After selecting the item, press
asqw
to set.
[COLOR MATCHING]
Correct the color difference between projectors when using multiple projectors simultaneously.
Adjusting the color matching as desired
1) Press
as
to select [COLOR MATCHING].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Color matching adjustment is not carried out.
[3COLORS]
Adjusts the three colors [RED], [GREEN], or [BLUE].
[7COLORS]
Adjusts the seven colors [RED], [GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW], or [WHITE].
[709MODE]
Refer to “Adjusting the color matching using a colorimeter” (
x
page 97) for details about this mode.
[MEASURED]
3) Select [3COLORS] or [7COLORS], and press the <ENTER> button.
f
The
[3COLORS]
or
[7COLORS]
screen is displayed.
4) Press
as
to select [RED], [GREEN], or [BLUE] ([RED], [GREEN], [BLUE], [CYAN], [MAGENTA],
[YELLOW], or [WHITE] for [7COLORS]).
5) Press the <ENTER> button.
f
The
[3COLORS:RED]
,
[3COLORS:GREEN]
, or
[3COLORS:BLUE]
screen is displayed.
For [7COLORS], the
[7COLORS:RED]
,
[7COLORS:GREEN]
,
[7COLORS:BLUE]
,
[7COLORS:CYAN]
,
[7COLORS:MAGENTA]
,
[7COLORS:YELLOW]
, or
[7COLORS:WHITE]
screen is displayed.
f
Set [AUTO TESTPATTERN] to [ON] to display a test pattern of selected colors.
6) Press
as
to select [RED], [GREEN], or [BLUE].
7) Press
qw
to adjust.
f
The adjustment value changes between 0 and 2 048.
Note
f
Operation when correcting the adjustment color
When the correction color same as the adjustment color is changed: The luminance of the adjustment color changes.
When correction color red is changed: Red is added to or subtracted from the adjustment color.
When correction color green is changed: Green is added to or subtracted from the adjustment color.
When correction color blue is changed: Blue is added to or subtracted from the adjustment color.
f
This adjustment should be carried out by a person who is familiar with the projector or by a service person because a high level of skill is
required to make a successful adjustment.
f
Pressing the <DEFAULT> button will restore the factory default settings for all items.
f
When [COLOR MATCHING] is set to other than [OFF], [COLOR TEMPERATURE] is fixed to [USER1].
f
Set [3D COLOR MATCHING] (
x
page 93) to set whether 2D and 3D signals are set separately or whether common data is used. (Only
for PT-DZ13KU, PT-DS12KU, PT-DW11KU)
f
When 2D and 3D settings are set separately, [NATIVE] or [3D] is displayed in the upper right of the menu. (Only for PT-DZ13KU,
PT-DS12KU, PT-DW11KU)
