Chapter 4
Settings — [PROJECTOR SETUP] menu
ENGLISH - 119
2) Press the <ENTER> button.
f
The
[RS-232C]
screen is displayed.
3) Press
as
to select [RESPONSE(ID ALL)].
4) Press
qw
to switch the item.
[ON]
Returns the response when the ID setting is ALL.
[OFF]
Does not return the response when the ID setting is ALL.
5) Press
as
to select [GROUP].
6) Press
qw
to switch the item.
[A] - [Z]
Controls multiple projectors simultaneously by sending the ID of RS-232C. You can set groups from
[A] to [Z]. The projector responds when the ID of RS-232C matches the setting.
7) Press
as
to select [RESPONSE(ID GROUP)].
8) Press
qw
to switch the item.
[ON]
Returns the response when the ID setting is GROUP.
[OFF]
Does not return the response when the ID setting is GROUP.
Note
f
Refer to “<SERIAL IN>/<SERIAL OUT> terminal” (
x
page 169).
[STATUS]
Display the status of the projector.
1) Press
as
to select [STATUS].
2) Press the <ENTER> button.
f
The
[STATUS]
screen is displayed.
3) Press
qw
to switch the pages.
f
The page will change each time you press the button.
[INPUT]
Displays the input terminal currently selected.
[SIGNAL NAME]
Displays the input signal name.
[SIGNAL FREQUENCY]
Displays the frequency of the input signal.
[PROJECTOR RUNTIME]
Displays the operation times of the projector.
[LAMP1]
*1
Displays the runtime and status of Lamp 1.
[LAMP2]
*1
Displays the runtime and status of Lamp 2.
[INTAKE AIR TEMP.]
Displays the status of the air intake temperature of the projector.
[OPTICS MODULE TEMP.]
Displays the status of the internal temperature of the projector.
[AROUND LAMP TEMP.]
Displays the status of the temperature around the lamps of the projector.
[PROJECTOR TYPE]
Displays the type of the projector.
[SERIAL NUMBER]
Displays the serial number of the projector.
[LAMP UNIT MODEL NO.]
Displays the model no. of the lamp unit.
[LAMP1 SERIAL NUMBER]
Displays the serial number of the lamp 1.
[LAMP2 SERIAL NUMBER]
Displays the serial number of the lamp 2.
[MAIN VERSION]
Displays the main version of the firmware of the projector.
[SUB VERSION]
Displays the sub version of the firmware of the projector.
[NETWORK VERSION]
Displays the firmware version of the projector.
[UPGRADE(ET-UK20)]
Displays the activation status based on the Upgrade Kit.
[ON COUNT]
[POWER ON TIMES]
Displays the number of times the power is turned on.
[LAMP1 ON]
Displays the number of times the lamp is turned on.
[LAMP2 ON]
[LAMP1]
Displays runtime in detail.
[LAMP2]
Displays runtime in detail.
[NUMBER OF REGISTERED
SIGNAL]
Displays the number of registered signals.