background image

Chapter 4

Settings — [DISPLAY OPTION] menu

100 - ENGLISH

[AUTO]

Automatically sets the signal level.

[64-940]

Select when the HDMI terminal output of an external device (such as a blu-ray disc player) is 

connected to the <DIGITAL LINK/LAN> terminal via a twisted-pair-cable transmitter.

[0-1023]

Select this when the DVI-D terminal output or HDMI terminal output of an external device (such as a 

computer) is connected to the <DIGITAL LINK/LAN> terminal via a twisted-pair-cable transmitter.

Note

 

f

The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the 

external device regarding the output of the external device.

[SDI IN]

(Only for PT-DZ870U)
Set to match the signal to input to the <SDI IN> terminal.

Setting [SIGNAL LEVEL]

Select the amplitude of the signal to input.

1)  Press 

as

 to select [SDI IN].

2)  Press the <ENTER> button.

 

f

The 

[SDI IN]

 screen is displayed.

3)  Press 

as

 to select [SIGNAL LEVEL].

4)  Press 

qw

 to switch the item.

[64-940]

Normally use this setting.

[4-1019]

Select when gray is displayed as black.

Setting [BIT DEPTH]

1)  Press 

as

 to select [SDI IN].

2)  Press the <ENTER> button.

 

f

The 

[SDI IN]

 screen is displayed.

3)  Press 

as

 to select [BIT DEPTH].

4)  Press 

qw

 to switch the item.

[AUTO]

Automatically select 12 bits or 10 bits.

[12-bit]

Fix to 12 bits.

[10-bit]

Fix to 10 bits.

Setting [3G-SDI MAPPING]

1)  Press 

as

 to select [SDI IN].

2)  Press the <ENTER> button.

 

f

The 

[SDI IN]

 screen is displayed.

3)  Press 

as

 to select [3G-SDI MAPPING].

4)  Press 

qw

 to switch the item.

[AUTO]

Automatically select level A or level B.

[LEVEL A]

Fix to level A.

[LEVEL B]

Fix to level B.

Note

 

f

Does not operate during SD-SDI or HD-SDI input.

Summary of Contents for PT-DW830U































































































































































































Reviews: