Panasonic PT-DW830U Operating Instructions Manual Download

Page: 103 / 190

Chapter 4

Settings — [DISPLAY OPTION] menu

ENGLISH - 103

2) Press the <ENTER> button.

The

[CLOSED CAPTION SETTING]

screen is displayed.

3) Press

to select [MODE].

4) Press

to switch the item.

The items will switch each time you press the button.

[CC1]

Displays CC1 data.

[CC2]

Displays CC2 data.

[CC3]

Displays CC3 data.

[CC4]

Displays CC4 data.

Note

Closed caption is a function that displays text information of video signals mainly used in North America. Captions may not be displayed

depending on the connected devices or contents being played back.

[CLOSED CAPTION SETTING] can be selected only if NTSC or 480i YC

signal is input.

If [CLOSED CAPTION] is set to [ON], brightness of images may change depending on the external devices compatible with closed caption

function to be connected or contents to be used.

If a closed caption signal of the selected mode is input, the security message set in the [SECURITY] menu

→

[DISPLAY SETTING]

(

page 131) is not displayed.

Closed captions are not displayed when the menu screen is displayed.

When the correction of [KEYSTONE] is large, all characters may not be displayed. (Only for PT-DW830U, PT-DX100U)

[BACK COLOR]

Set the display of the projected screen when there is no signal input.

1) Press

to select [BACK COLOR].

2) Press

to switch [BACK COLOR].

The items will switch each time you press the button.

[BLUE]

Displays the entire projection area in blue.

[BLACK]

Displays the entire projection area in black.

[DEFAULT LOGO]

Displays the Panasonic logo.

[USER LOGO]

Displays the image registered by the user.

Note

To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.

[STARTUP LOGO]

Set the logo display when the power is turned on.

1) Press

to select [STARTUP LOGO].

2) Press

to switch the item.

The items will switch each time you press the button.

[DEFAULT LOGO]

Displays the Panasonic logo.

[USER LOGO]

Displays the image registered by the user.

[NONE]

Disables the startup logo display.

Note

The startup logo will disappear in approximately 15 seconds.

To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.

[UNIFORMITY]

Correct the brightness and color unevenness of the entire screen.

Setting each color

1) Press

to select [UNIFORMITY].

Summary of Contents for PT-DW830U































































































































































































Search results

Summary of Contents for PT-DW830U

Reviews:

Related manuals for PT-DW830U

Brands by name

Popular brands

Panasonic PT-DW830U, Operating Instructions Manual

Search results

Summary of Contents for PT-DW830U

Reviews:

Related manuals for PT-DW830U

Brands by name

Popular brands