Panasonic PT-AE8000U Page 82 Operating Instructions Manual Download

Page: 82 / 110

[OPTION] menu

82 -

ENGLISH

Settings

■

[POWER ON LINK]

Specify whether or not to switch the power of the projector
on when it is in standby by operating external devices.

Switch settings

[NO]

Inactive

[YES]

Switch projector power on along

with external devices

Note

Depending on the external device, the projector may

automatically turn on when some functions of the

connected devices are used. (Only in standby)

Due to the projector’s characteristics, it takes time

before projection begins. Please be aware that video

may already have started by the time the projector is

operating fully.

■

[POWER OFF LINK]

Specify whether to switch the power off for external devices
when this projector is set to standby.

Switch settings

[YES]

Switch the power of external

devices off along with this

projector

[NO]

Do not switch the power of

external devices off along with

this projector

Note

This function works even if the projector enters standby

mode automatically through the [SLEEP] function.

There are cases where some external devices may

not be switched off depending on their status (currently

recording etc.)

■

[ENERGY SAVING MODE]

Specify whether or not to switch the mode of external
devices to the mode with minimum power consumption
when the projector is set to standby.

Switch settings

[QUICK

START]

Do not switch

[SAVE]

Switch the mode of external

devices to the mode with

minimum power consumption

Note

This function works when [POWER OFF LINK] is set to

[YES].

Depending on the external devices, when the projector

is turned on power consumption may increase even in

[ENERGY SAVING MODE] mode in order to achieve

faster start up.

■

[UNUSED DEVICE ENERGY SAVE]

Specify whether or not to keep the power on for external
devices selected for input and switch the power off for
external devices not selected for input.
If you select [YES (WITH PROMPT)], a message is
displayed before the function operates.

Switch settings

[NO (STAY

ON)]

Maintain the power on state of

devices for which input is not

selected

[YES (WITH

PROMPT)]

After a confirmation message is

displayed, devices for which the

input is not selected are set to

standby mode

[YES (NO

PROMPT)]

Devices for which the input is not

selected are set to standby mode

Note

This function may not work properly depending on the

external device.

Downloaded From projector-manual.com Panasonic Manuals

Summary of Contents for PT-AE8000U















































































































Search results

Summary of Contents for PT-AE8000U

Reviews:

Related manuals for PT-AE8000U

Brands by name

Popular brands

Panasonic PT-AE8000U, Operating Instructions Manual

Search results

Summary of Contents for PT-AE8000U

Reviews:

Related manuals for PT-AE8000U

Brands by name

Popular brands