Panasonic PT-AE8000U Operating Instructions Manual Download

Page: 28 / 110

Switching the projector on/off

28 -

ENGLISH

Basic Operation

Switching the projector on/off

Power cord

Use the power cord included to prevent removal of the power cord and make sure it is fully inserted into

the projector.

Make sure the <MAIN POWER> switch is on the <OFF> side before connecting the power cord.

Use the power cord included and ensure that it is fully inserted.

For power cord handling details, see “Read this first!”. (



pages

13)

■

Connecting

Fully insert until the tabs on the left

and right make a click sound.

■

Disconnecting

Pull out while pushing on the tabs on

the sides.

Power indicator

The power indicator indicates the power status.

Check the status of the power indicator <ON (G) / STANDBY (R)>

before operating the projector.

Indicator status

Status

No illumination or flashing

Main power is switched off.

Red

Lit

Power is switched off. (Standby mode.)

Press the power < / | > button to start projection.

* Does not operate when the lamp indicator or temperature indicator is flashing.

Flashing

Power is switched off (standby mode) and the [POWER ON LINK] is set to

[YES] in the VIERA Link settings.

For details about [POWER ON LINK], see [POWER ON LINK] (



page 82).

Green

Flashing

The projector is preparing to project.

Projection starts after a brief pause.

Lit

Projecting.

Orange

Lit

Preparing to switch off the power.

The power is switched off after a while. (Changes to the standby mode.)

Flashing

The power < / | > button is switched on again in the power off preparation

mode.

Preparing to project. Projection starts after a brief pause.

Attention

The internal fan operates and cools the projector while it is preparing to power off (when the power indicator is illuminated

orange). Do not switch the main power off or remove the power cord.

Note

When the power < / | > button is pressed while the projector is in the power off preparation mode, it may take some time

to enter projection mode.

The projector consumes approx. 0.08 W of electrical power even when the power is off (when the power indicator is

illuminated red).

Power consumption when the power indicator flashes red is almost the same as when the lamp is illuminated red.

Power indicator

Downloaded From projector-manual.com Panasonic Manuals

Summary of Contents for PT-AE8000U















































































































Search results

Summary of Contents for PT-AE8000U

Reviews:

Related manuals for PT-AE8000U

Brands by name

Popular brands

Panasonic PT-AE8000U, Operating Instructions Manual

Search results

Summary of Contents for PT-AE8000U

Reviews:

Related manuals for PT-AE8000U

Brands by name

Popular brands