E
NGLISH
- 21
Basic Op
eratio
n
Projecting an image
1. Switch on the connected devices.
Press the play button of the required device.
2.
Press the
INPUT
button to select the required
input method if needed. See "Switching the input
signal" on page 23.
The image will be projected on the screen.
1. Press
ASPECT
to select the required aspect
mode. See "Switching the aspect ratio" on
page 23.
2. Adjust the projected image with the
Lens
shift dials
. See "Lens shift and positioning"
on page 16.
3. Adjust the angle of the projector.
Screw down the
Front leg adjuster
and adjust
the angle vertically.
4. Adjust the focus and the projected image
size.
Press +/- of the
FOCUS
and
ZOOM
buttons to
adjust.
Press the
LENS
button to adjust the focus and
zoom by
Remote control
. see “LENS
CONTROL Menu” on page 37
Selecting the input signal
NOTE:
AUTO SEARCH
is
ON
as default and the signal from the connected devices is detected automatically. See
"AUTO SEARCH" on page 38.
Positioning the image
NOTE:
Do not touch the
Air exhaust port
as this may
cause burns or injury.
If keystone distortion occurs, see “KEYSTONE”
on page 36.
PT-AE1000E.book Page 21 Monday, October 16, 2006 1:05 PM
Summary of Contents for PT-AE1000E
Page 56: ......
