Panasonic PT-AE1000E, Operating Instructions Manual

Page: 31 / 56

E
NGLISH
- 31
Settings
PICTURE Menu
Depending on the projection environment, you can use
these preset parameter settings to optimise image
projection. Press
I H
to cycle through the options.
You can adjust the contrast of the projected image.
Adjust the
BRIGHTNESS in advance if necessary.
Setting range: -64 to +64
You can adjust the brightness of the projected image.
Setting range: -32 to +32
You can adjust the colour saturation of the projected
image.
Setting range: -32 to +32
When PC is connected, this function is available with
1 125 (1 080)/60i, 1 125 (1 080)/50i,
1 125 (1 080)/60p and 1 125 (1 080)/50p signals
only.
You can adjust the skin tone in the projected image.
Setting range: -32 to +32
When PC is connected, this function is available with
1 125 (1 080)/60i, 1 125 (1 080)/50i,
1 125 (1 080)/60p and 1 125 (1 080)/50p signals
only.
You can adjust the sharpness of the projected image.
Setting range will vary according to the selected
input signal
You can adjust the white balance of the projected
image.
Setting range: -6 to +6
PICTURE MODE
NORMAL
Setting for a general image, such as
sports or games
DYNAMIC Bright and sharp setting
CINEMA1 Hollywood style colours
CINEMA2 Deeper and more rich colour setting
CINEMA3 Vivid and crisp colour setting
COLOUR1
Setting for HDTV standard in
ITU-R BT. 709 and colour
temperature 6 500 K at the default
setting of the
PICTURE menu items.
COLOUR2
Setting for DCDM standard and
colour temperature 6 300 K at the
default setting of the
PICTURE menu
items.
NOTE:
It may take for a while until the selected mode is
stabilised.
CONTRAST
BRIGHTNESS
See “Navigating through
the MENU” on page 28.
Higher Lower
Brighter Darker
COLOUR
TINT
SHARPNESS
COLOUR TEMPERATURE
Lighter Darker
More
reddish
More
greenish
More
sharp
Less
sharp
Less
reddish
Less
bluish
PT-AE1000E.book Page 31 Monday, October 16, 2006 1:05 PM