97
4.6.2.b.
Set Port Priority for LACP
On the Trunk Configuration Menu, pressing "o" opens the Set Port Priority screen,
as shown in Fig. 4-39. On this screen, you can set the priority value of trunking.
PN28168 Local Management System
Trunk Configuration Menu -> Set Port Priority
System Priority : 1
System ID : xx:xx:xx:xx:xx:xx
Port Priority
----- ----------
1 1
2 1
3 1
4 1
5 1
6 1
7 1
8 1
9 1
10 1
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page [S]et Port Priority
[P]revious Page [Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Fig. 4-39 Set Port Priority for LACP
Screen Description
System Priority
The system priority is the order of the priority in this Switching Hub required for
constructing trunking on the network using LACP.
The smaller number has higher priority. The factory default setting is "1."
System ID
The System ID is the identifier of this Switching Hub required for constructing
trunking on the network using LACP.
The MAC address of this Switching Hub becomes this System ID, and it is not pos
-
sible to change this ID. Combination of the System Priority value and the System
ID becomes the System ID in LACP.
Port
The port number of this Switching Hub.
Priority
The priority order of this Switching Hub in trunking by port. The smaller number
has higher priority. For all ports, "1" is the factory default setting.
Available commands are listed below.
N
Display the next page.
Press "N" to display the next page.
P
Display the previous page.
Press "P" to display the previous page.
S
Set the priority value (priority order) by port.
Press "S."The command prompt changes to "Enter port number>." Enter a port number you
wish to configure.The command prompt changes to "Enter port priority>." Enter a port pri
-
ority you wish to configure priority of 0-255.
Q
Return to the parent menu.
