76
4.5.9.
SNTP Configuration
In this Switching Hub, it is possible to set the time accurately by synchronizing the
internal clock to an external SNTP server's clock via SNTP (Simple Network Time
Protocol).
On the Basic Switch Configuration Menu, pressing "T" opens the Time Configura
-
tion Menu screen, as shown in Fig. 4-29. On this screen, you can configure the
SNTP settings.
PN28168 Local Management System
Basic Switch Configuration -> Time Configuration Menu
Time ( HH:MM:SS ) : xx:xx:xx
Date ( YYYY/MM/DD ) : xxxx/xx/xx xxxxxx
SNTP Server IP : x.x.x.x
SNTP Polling Interval : 1440 Min
Time Zone : (GMT+09:00) Osaka,Sapporo,Tokyo
Daylight Saving : N/A
-------------------------------- <COMMAND> -----------------------------------
Set SNTP Server I[P]
Set SNTP [I]nterval
Set Time [Z]one
S[e]t Daylight Saving
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Fig. 4-29 SNTP Configuration Menu
Screen Description
Time(HH:MM:SS):
Displays the time of the internal clock.
Date(YYYY/MM/DD):
Displays the date of the internal clock.
SNTP Server IP:
Displays the IP address of the SNTP server that executes time synchroni
-
zation.
SNTP Polling Interval:
Displays the interval of time synchronization with the SNTP server.
Time Zone:
Displays the time zone.
Daylight Saving:
Displays the application status of Daylight Saving (Summer time).
