72
3.2.18. DMI (DDM) Config
Select "Advanced Config" and "DMI (DDM) Config" to open the screen shown in
Figure 3-44. On this screen, you can configure the DMI (Digital Diagnostic Monitor
-
ing Interface) settings.
Figure 3-44 DMI (DDM) Config
Screen Description
Limit Trap
Displays the status of the Limit Trap function.
Enable
Enables Limit Trap.
Disable
Disables Limit Trap.
Target SFP Port
Number
Displays the SFP port number to be displayed and configured.
Vendor Name
Displays the vendor name.
Port Product Num
-
ber
Displays the product number.
Port Serial Number
Displays the serial number.
Transceiver Type
Displays the Transceiver Type.
RX Power(dBm)
Displays the current, maximum, and minimum values of RX Power(dBm). The
maximum and minimum values can be configured.
TX Power(dBm)
Displays the current, maximum, and minimum values of TX Power(dBm). The
maximum and minimum values can be configured.
Temp(deg.C)
Displays the current, maximum, and minimum values of Temp(deg.C). The
maximum and minimum values can be configured.
Voltage(V)
Displays the current, maximum, and minimum values of Voltage(V). The maxi
-
mum and minimum values can be configured.
Bias Current(mA)
Displays the current, maximum, and minimum values of Bias Current(mA). The
maximum and minimum values can be configured.
