39
3.1.16. ID/Password Change
Select "Basic Config" and "System Security" and then "ID/Password Change" to
open the screen shown in Figure 3-16. On this screen, you can configure the user
-
name/password.
Figure 3-16 ID/Password Change
Screen Description
Note:
Do not forget your username and password.
These settings are required to log in to the console, SSH, Telnet, and Web.
Current User ID
Enter the current username.
This setting is used to log in to this switch.
"manager" is the factory default setting.
Current Password
Enter the current password.
This setting is used to log in to this switch.
"manager" is the factory default setting.
New User ID
Enter a new username.
New Password
Enter a new password.
New Password
(Confirm)
Enter a password again to prevent erroneous password input.
