manualshive.com logo in svg

Panasonic PanaXSeries MN1030 Series, User Manual

Share
Download
Panasonic PanaXSeries MN1030 Series User Manual Download Page 245

Chapter 12   List of  Machine Language Instructions

List of Machine Language Instructions  233

Register 
Relative 
Indirect

MOV (d, Am), An

Transfers the contents of the memory location specified by Am and 
displacement d to An.
8- and 16-bit displacements are sign-extended.

MOV (d, SP), An

Transfers the contents of the memory location specified by SP and 
displacement d to An.
8- and 16-bit displacements are zero-extended.

MOV (d8, Am), SP

Transfers the contents of the memory location specified by Am and 
displacement d to SP.
8- and 16-bit displacements are sign-extended.

MOV Dm, (d, An)

Transfers the contents of Dm to the memory location specified by An 
and displacement d.
8- and 16-bit displacements are sign-extended.

MOV Dm, (d, SP)

Transfers the contents of Dm to the memory location specified by SP 
and displacement d.
8- and 16-bit displacements are zero-extended.

MOV Am, (d, An)

Transfers the contents of Am to the memory location specified by An 
and displacement d.
8- and 16-bit displacements are sign-extended.

MOV Am, (d, SP)

Transfers the contents of Am to the memory location specified by SP 
and displacement d.
8- and 16-bit displacements are zero-extended.

MOV SP, (d8, An)

Transfers the contents of SP to the memory location specified by An 
and 8-bit displacement d8.
8- bit displacements are sign-extended.

MOVBU (d, Am), Dn

Transfers, with zero-extension, the 8-bit contents of the memory 
location specified by Am and displacement d to Dn.
8- and 16-bit displacements are sign-extended.

MOVBU (d, SP), Dn

Transfers, with zero-extension, the 8-bit contents of the memory 
location specified by SP and displacement d to Dn.
8- and 16-bit displacements are zero-extended.

MOVBU Dm, (d, An)

Transfers the lowest 8 bits of Dm to the memory location specified by 
An and displacement d.
8- and 16-bit displacements are sign-extended.

MOVBU Dm, (d, SP)

Transfers the lowest 8 bits of Dm to the memory location specified by 
SP and displacement d.
8- and 16-bit displacements are zero-extended.

MOVB (d, Am), Dn

Transfers, with sign-extension, the 8-bit contents of the memory 
location specified by Am and displacement d to Dn.
8- and 16-bit displacements are sign-extended.

MOVB (d, SP), Dn

Transfers, with sign-extension, the 8-bit contents of the memory 
location specified by SP and displacement d to Dn.
8- and 16-bit displacements are zero-extended.

MOVB Dm, (d, An)

Transfers the lowest 8 bits of Dm to the memory location specified by 
An and displacement d.
8- and 16-bit displacements are sign-extended.

MOVB Dm, (d, SP)

Transfers the lowest 8 bits of Dm to the memory location specified by 
SP and displacement d.
8- and 16-bit displacements are zero-extended.

Mnemonic

Description of operation

Summary of Contents for PanaXSeries MN1030 Series





















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands