manualshive.com logo in svg

Panasonic PanaXSeries MN1030 Series, User Manual

Share
Download
Panasonic PanaXSeries MN1030 Series User Manual Download Page 20

Chapter 1   Getting Started

8  Setup

The start-up file .as103rc supports the following keywords.

The start-up file .ld103rc supports the following keyboards.

Keyword

Description

message

This entry specifies the language and coding scheme for messages from the assembler. 
One of the parameters ENGLISH, EUC, SJIS, or JIS comes after the keyword “message” 
followed by a blank space. These parameters have the following meanings.
   message ENGLISH  Outputs messages in English
   message EUC          Outputs messages in Japanese using EUC encoding
   message SJIS           Outputs messages in Japanese using Shift JIS encoding
   message JIS             Outputs messages in Japanese using JIS encoding
The default setting depends on the host machine and operating system.
   Sun/Sparc      ENGLISH
   DOS/V          SJIS
   PC/AT           ENGLISH

notation

This entry specifies the notation used for numbers in assembly language programs. One of 
the parameters PANA, CLANG, or INTEL comes after the keyword “notation” followed 
by a blank space. These parameters have the following meanings.
   notation PANA     Use Panasonic notation
   notation CLANG  Use C language notation
   notation INTEL    Use Intel notation
The default setting is in extended C language format.

O-OPTION

This entry controls optimization. Either ON or OFF of the parameters comes after the 
keyword O-OPTION followed by a blank space. These parameters have the following 
meanings.
   O-OPTION ON       Enable optimization
   O-OPTION OFF     Disable optimization
The default setting is to disable optimization.

Keyword

Description

message

This entry specifies the language and coding scheme for messages from the linker. One of 
the parameters ENGLISH, EUC, SJIS, or JIS comes after the keyword “message” 
followed by a blank space. These parameters have the following meanings.
   message ENGLISH  Outputs messages in English
   message EUC          Outputs messages in Japanese using EUC encoding
   message SJIS           Outputs messages in Japanese using Shift JIS encoding
   message JIS             Outputs messages in Japanese using JIS encoding
The default setting depends on the host machine and operating system.
   Sun/Sparc      ENGLISH
   DOS/V          SJIS
   PC/AT           ENGLISH

g-OPTION

This entry controls the output of debugging information. Either ON or OFF of the 
parameters comes after the keyword g-OPTION followed by a blank space. These 
parameters have the following meanings.
   g-OPTION ON       Enable output of debugging information
   g-OPTION OFF     Disable output of debugging information
The default setting is to disable output of debugging information.

Summary of Contents for PanaXSeries MN1030 Series





















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands