37
Function
13
DEPT. COUNTER MODE
Monitors the copy usage of each department.
Consult your
1: TOTAL COUNTER
authorized
2: DEPT. COUNTER
service provider
3: DEPT. COUNTER LIST
16
LANGUAGE PRIORITY
Selects whether to enable the language selection 1:OFF
menu to display when the machine comes out of
the Energy Saver Mode, or when the RESET
button is pressed once.
1:OFF / 2:ON
17
DATE & TIME
Sets the date and time.
Month, Day, Year, Time
Input the date and time using the Cursor Keys
and the Keypad.
18
DAYLIGHT TIME
Selects whether to enable the daylight time feature. 2:VALID
1:INVALID / 2:VALID
19
IP ADDRESS (DHCP)
*
1,
*
2
Displays the address which was reserved by
DHCP server.
20
SUBNET MSK (DHCP)
*
1,
*
2
Displays the address which was reserved by
DHCP server.
21
DEF. G/W IP (DHCP)
*
1,
*
2
Displays the address which was reserved by
DHCP server.
22
DHCP DEFAULT
Selects whether to enable the DHCP.
2:VALID
1:INVALID / 2:VALID
23
DNS SERVER ADDR.
*
2
Selects whether to enable the DNS Server, and
2:VALID
sets its settings for Internet Fax/Email Function.
1:INVALID
2:VALID
<Sub Function>
1:HOST NAME / 2:DOMAIN NAME /
3:PRI. DNS SERVER (IP ADDRESS1) /
4:SEC. DNS SERVER (IP ADDRESS2)
24
MAC ADDRESS
Indicates the MAC address.
25
HARD DISK FORMAT
*
3
Formats the hard disk.
26
HARD DISK ERROR CHECK
*
3
Selects the provision for the hard disk error check.
27
ABBR GROUP ID
Inputs the group ID for the address book.
0
0-99
28
COMMUNITY NAME(1)
*
2
Selects whether to change the Community
public
Name(1) SNMP.
Enables read only.
29
COMMUNITY NAME(2)
*
2
Selects whether to change the Community
public
Name(2) SNMP.
Enables read/write.
30
DEVICE NAME
*
2
Inputs the device name when required.
Panasonic UF-9000
(For Status Monitor/EtherTalk Machine Name)
31
DEVICE LOCATION
*
2
Inputs the device name when required.
(For Status Monitor)
■
General Settings (For Key Operator) (Continued)
No.
Modes
Function
Initial
Setting
*
1
When setting other than DHCP server Network settings, Parameter No. “22 DHCP DEFAULT” should be set to
“INVALID” first, then setup Parameter No.19 to 21.
*
2
When Parameter No.19 to 23 (except 22) and No.28 to 31 are set, cycle the power by turning the Power Switch on
the Left Side of the machine OFF and ON.
*
3
Available only when the optional Hard Disk Drive Unit is installed.
NOTE:
When not connecting to LAN, the setting of DHCP should be on INVALID. When the setting of DHCP is
on VALID, and the machine is in Shutdown Mode, the machine will not answer an incoming Fax call.
Summary of Contents for Panafax UF-9000
Page 65: ......
