Panasonic Panafax UF-585 Page 87 User Manual Download

Page: 87 / 176

(see Note 1) (see Note 2) (see Note 3)

To delete the station(s), press

key until the

station you want to delete appears. Then press

Enter the station(s) you want to add.

Ex:

1. Your machine cannot change the start time and/or stations in the file while it is being sent or waiting to redial.
2. If the file is not a Deferred Communication File, the following message is shown on the display.

Press

to change the type of the file for deferred communication file.

3. If you edit the file that is saved as an incomplete file, after pressing

in step 8, your machine will prompt

you whether to execute the file immediately.
The display shows:

Press

to execute the file immediately.

CLEAR

SET

ENTER STATION(S)

THEN PRESS START

1 STN(S) ARE SET

ADD MORE OR START

START

* STORE * 005

SET DEFERRED COMM.?

1:YES 2:NO

START

RETRY INCOMP FILE?

1:YES 2:NO

Note:

Edit File Mode

Summary of Contents for Panafax UF-585

















































































































































































Search results

Summary of Contents for Panafax UF-585

Reviews:

Related manuals for Panafax UF-585

Brands by name

Popular brands

Panasonic Panafax UF-585, User Manual

Search results

Summary of Contents for Panafax UF-585

Reviews:

Related manuals for Panafax UF-585

Brands by name

Popular brands