Panasonic Panafax UF-585 User Manual Download Page 21

Page: 21 / 176

(1) Load the paper into the Paper Cassette.

Slide the paper width guide to the left until

it lightly touches the stack of paper without

bending the paper. The paper must fit

squarely and firmly between the Paper

Width Guide and the right side of tray. If it

does not, the paper may feed into the

printer incorrectly resulting in a paper jam.

Caution: Make sure that the paper is set

under the metal Paper Separation

Clips and that it does not exceed

the Maximum Paper Capacity Mark.

You can load about 250 sheets (20

lb weight). For paper specification,

see page 154.

(2) Re-install the Paper Cassette Cover.

(3) Slide the Paper Cassette into the machine.

Paper

Width Guide

Max. Paper

Capacity Mark

Loading the Recording Paper

Summary of Contents for Panafax UF-585

















































































































































































Search results

Summary of Contents for Panafax UF-585

Reviews:

Panasonic Panafax UF-585, User Manual, Page: 21 / 176

Search results

Summary of Contents for Panafax UF-585

Reviews: