Panasonic Panafax UF-585 User Manual Download Page 175

Page: 175 / 176

START

ABBR

UICK

UIDE UF-585/595

How to Set Documents.

Set the documents face down
and adjust the document guides.

You can set the documents on the ADF(Automatic
Document Feeder) up to 30 pages* at one time.

*:[Based on Letter size document, thickness 0.0024”(12 lbs)
to 0.0039”(16 lbs)]

The display message is as shown below when the
documents are set properly.

How to Send Using Manual Dialing.

How to Send Using One-Touch/Abbreviated Key.

Set the documents
face down.

Enter the telephone number.

The document is
stored in memory.
Then, your machine
starts dialing .

Set the documents
face down.

The document is
stored in memory.
Then, your machine
starts dialing .

ENTER STATION(S)

THEN PRESS START 00%

Enter a 3-digit
code (001 to 072).

START

Summary of Contents for Panafax UF-585

















































































































































































Search results

Summary of Contents for Panafax UF-585

Reviews:

Panasonic Panafax UF-585, User Manual, Page: 175 / 176

Search results

Summary of Contents for Panafax UF-585

Reviews: