Panasonic Panaboard UB-8325 Operating Instructions Manual Download Page 87

Page: 87 / 100

Assembling the Electronic Board

Inst

allation

Install the electronic board.

Install the electronic board using the stand (option)
or wall-mounting kit (option).

■

Using the stand (option)

1) Hang the electronic board on the optional

stand.

•

The electronic board can be mounted
200 mm (7

”

) higher than hang position

by hanging it with the wing bolts

2) Secure the stand fixture to the electronic

board using the two wing-bolts [M5 x 12 mm
(15/32”)] provided with the

stand (option)

■

Using the wall-mounting kit (option)

1) Hang the electronic board on the optional

wall-mounting fixtures.

2) Secure the wall-mounting fixture to the

electronic board using the two wing-bolts
[M5 x 12 mm (15/32”)] provided with the

wall-

mounting kit (option)

•

When mounting the electronic board, avoid banging
it. Such impact may break the internal light or cause
other damage.

•

After mounting the electronic board, gradually apply
weight to it to make sure that the wall is strong
enough to support it.

Caution

Summary of Contents for Panaboard UB-8325





































































































Search results

Summary of Contents for Panaboard UB-8325

Reviews:

Related manuals for Panaboard UB-8325

Brands by name

Popular brands

Panasonic Panaboard UB-8325, Operating Instructions Manual

Search results

Summary of Contents for Panaboard UB-8325

Reviews:

Related manuals for Panaboard UB-8325

Brands by name

Popular brands