PAN1026A Bluetooth Module
4 Software Related Documents Summary
Design Guide Rev. 1.0
Page 14
4.2 Unique Mac/Bluetooth Address
The PAN1026A has a preprogrammed address in the EEPROM that needs to be copied into the
RAM during the initialization. Therefore three TCU commands need to be used. Below is an
example with the individual address
00 13 43 00 00 1A
1. Enter the address:
01 08 FC 0B 00 A0 00 00 00 14 5B FF 02 03 01
The result is:
04 FF 0A 08 00 A0 00 00 00 14 5B 00 00
2. Read BT address from E2PROM:
01 08 FC 10 00 A1 00 00 00 14 88 FF 10 06 A0 01 01 06 02 00
The result is:
04 FF 11 08 00 A1 00 00 00 14 88 00 10 06
00 13 43 00 00 1A
3. Set BD address into RAM:
01 13 10 06
1A 00 00 43 13 00
The result is:
04 0E 04 04 13 10 00
The “red” BT address is original and needs to be byte switched to write into
the RAM of the module to be visible in an BT inquiry as example.
