Before using
16
LSQT0975
ª
Connecting to the AC outlet
1
Connect the AC Cable to the AC adaptor
and the AC Jack.
2
Connect the DC Cable to the AC adaptor.
3
Connect the DC Cable to this product.
≥
The output plug of the AC Cable is not
completely connected to the AC adaptor jack.
As shown in
1
, there is a gap.
≥
Do not use the power cord for other
equipment since the power cord is exclusively
designed for this Camcorder. Do not use the
power cord from other equipment for this
Camcorder.
ª
Attaching the battery
Push the battery against the battery holder and
slide it until it clicks.
ª
Removing the battery
While sliding the [BATT] lever, slide the battery
(or the DC Cable) to remove it.
≥
Hold the battery with your hand so it does not
fall.
≥
Before removing the battery, be sure to set the
[OFF/ON] switch to [OFF].
1
BATT
LSQT0975_ENG.book 16 ページ ２００５年１２月１９日 月曜日 午前９時５１分
