Supplying Power
(AC Adaptor/Car Battery Cord)
DC
Power
Power Indicator
Lamp
Connector
Cord
Cigarette
Lighter Socket
AC Adaptor
(Supplied)
1
Connect the DC Output on the AC
Adaptor to the DC Input on the
Palmcorder
with the DC Power Cable
(supplied).
2
Plug in the AC Adaptor.
•
The Power indicator will light up.
Car Battery Cord (Optional)
1
Connect a PV-C16-K Car Battery Cord to
the DC Input
of the Palmcorder.
2
Start your car engine and then insert the
Car Battery Cord plug into your cigarette
lighter socket.
•
There is a fuse located in the lighter plug end
of the cord.
Should fuse replacement be necessary, use
the exact current rating (in amps).
Note:
This cord can only be used in vehicles equipped
with
DC 12V (negative ground)
batteries.
Use only the specified car battery cord.
11
