12
STEP 4: INSTALLING THE MICROWAVE OVEN
1. Remove contents from inside the oven including glass tray and wire rack.
Be sure to close the door. Remove all contents from upper kitchen cabinet.
2. Place a piece of cardboard or blanket on the cook top, place oven on the cardboard or blanket.
3. Before sliding the oven on the bracket assembly, be sure that the power supply cord will be accessible
through the cabinet.
4. Pass AC cord through kitchen cabinet hole. (No.
w
in Fig. 2-1)
5. Lift and install the oven onto the bracket by sliding it over the rails of the bracket. This is easily and safely
accomplished with one person on each side of the oven. Push the oven all the way back until it is
fl
ush with
the wall.
Pull the power supply cord through out and be careful not to pinch it between the outer case of the oven
and bottom of the cabinet. The oven should
fi
t snugly underneath the lip of the bracket’s upper edge.
(Fig. 4-1)
Power Supply Cord
Fig. 4-1
Fig. 4-2
6. Insert one screw (hardware items either
e
-a or
e
-b) with
fl
at washer (hardware item
r
) through the left
hole drilled through the top cabinet’s bottom and into the top of the oven. (Fig. 4-3)
Insert another screw (hardware items either
e
-a or
e
-b) with
fl
at washer (hardware item
r
) and the metal
brace (hardware item
o
) through the right hole into the top of the oven. (Fig. 4-3)
Screw
(hardware
e
-a or
e
-b)
Metal Brace
(hardware
o
)
Flat Washer
(hardware
r
)
Power Supply Cord
Fig.4-3
7. While tightening these screws, lift the front side of the oven and push it toward the wall. This ensures a
fl
ash
and level mounting.
IP2386_38Q01CP_Eng_04_080105.indd 12
IP2386_38Q01CP_Eng_04_080105.indd 12
2009-1-6 Michael 9:16:49
2009-1-6 Michael 9:16:49
