Operating Instructions
44
Host Name
(DHCP Only)
•
If your ISP uses the DHCP function which automatically
assigns the IP address to the camera, enter the ISP-
assigned host name. (Host name may be used as an
authentication.)
•
Enter ASCII characters for the host name (see page 145).
But [Space], ["], ['], [&], [<] and [>] are not available.
Default Gateway
*1
(Static/DHCP Only)
•
If you have the assigned Default Gateway address by your
ISP or network administrator, enter it in this data field.
•
Set 4 digits (0—255) and 3 periods such as
"192.168.0.253". But "0.0.0.0" and "255.255.255.255" are
not available.
DNS Server
Address
*1
(Static/DHCP Only)
•
DNS server address is required in the following conditions.
•
Transferring camera images by E-mail or FTP
•
Setting cameras by their host names on the Multi-
Camera Setup page
•
Using the Viewnetcam.com service
•
If you have the assigned DNS server addresses by your
ISP or network administrator, enter them in this data field.
They usually have two addresses.
•
Set 4 digits (0—255) and 3 periods such as
"192.168.0.253". But "0.0.0.0" and "255.255.255.255" are
not available.
Max. Bandwidth
Usage
•
The bandwidth can be restricted.
•
Select the maximum bandwidth usage from [Unlimited] to
[0.1 Mbps].
•
This setting is valid in both IPv4/IPv6.
Note
Set the maximum bandwidth usage seeing the following
file sizes. These are examples for a JPEG file with a
standard image quality. File sizes may change depending
on the image quality or how bright the object is.
160 x 120 pixels: About 5 KB (40 Kbit)
320 x 240 pixels: About 16 KB (128 Kbit)
640 x 480 pixels: About 33 KB (264 Kbit)
Setting
Description
Summary of Contents for OneHome BB-HCM311A
Page 151: ...Operating Instructions 151 Index ...
