Panasonic OneHome BB-HCM311A Page 64 Operating Instructions Manual Download

Page: 64 / 154

Operating Instructions

2.9

Setting Date and Time

The Date and Time page allows you to set date and time. Date and time are used
for image buffer/transfer, operation time and time stamps on the buffered image.

Note

Saving the date and time settings deletes all buffered images on the internal
memory. The buffered images on the SD memory card are not deleted.

Click [Date and Time] on the Setup page.

Set each parameter.

•

Set [Automatic Time Adjustment] to synchronize the time automatically
with an NTP server.

•

Clicking [Cancel] cancels your settings without saving changes.

Summary of Contents for OneHome BB-HCM311A



























































































































































Search results

Summary of Contents for OneHome BB-HCM311A

Reviews:

Related manuals for OneHome BB-HCM311A

Brands by name

Popular brands

Panasonic OneHome BB-HCM311A, Operating Instructions Manual

Search results

Summary of Contents for OneHome BB-HCM311A

Reviews:

Related manuals for OneHome BB-HCM311A

Brands by name

Popular brands