Panasonic OmniVision PV-QV200, Service Manual

Page: 93 / 136

board assembly instead of individual parts.
(Q2501, Q2502, Q2503, Capstan Coil)
8. When installing the IC2501 (AN3846SC or AN3845SC) or Capstan
Stator C.B.A., be sure to apply Silicon Grease (VFK1301). Refer to
"Stopper Angle, Capstan Rotor Unit, Oil Seal, Capstan Stator
C.B.A., and MR Head" of MECHANISM SECTION in DISASSEMBLY/
ASSEMBLYPROCEDURES.
9. Since the UHF/VHF TUNER/TV DEMODULATOR UNIT (Ref. No.
E21) has already been pre-adjusted at the factory, do not try to
adjust the UHF/VHF TUNER/TV DEMODULATOR UNIT. The UHF/
VHF TUNER/TV DEMODULATORUNIT replacement part is
available as a complete assembly unit only.
10. AC cord replacement note
for models PVQ-V200, PV-V4020, and PV-V4520:
Either Type-A or B is used as a AC cord for these models.
However, for parts standardization and interchangeability, Type-B
will be supplied with Connector P1001 as a kit (Part No.: LSJA0281
-S) for replacement. When replacing ACcord on products using
Type-A, connect Connector P1001 to Main C.B.A. with solder and
connect AC cord to Connector P1001.
11. Main C.B.A. replacement note
for models PVQ-V200, PV-V4020, and PV-V4520:
VEPS6061AA or VEPS6061AD for PVQ-V200, VEPS6060GA or
VEPS6060GB for PV-V4020, VEPS6060HA or VEPS6060HC for PV-
V4520 are used as Main C.B.A. However, for parts
standardization, only VEPS6061AA for PVQ-V200, VEPS6060GA
for PV-V4020and VEPS6060HA for PV-V4520 are supplied as a
replacement. Please note that VEPS6061AA and VEPS6061AD,
VEPS6060GA and VEPS6060GB, VEPS6060HA and VEPS6060HC