Panasonic Omnivision PV-9661, Service Manual

Page: 282 / 407

5.2.16. Loading Rack Unit
5.2.16.1. Disassembly Procedure
1. Slide the Loading Rack Unit as indicated by the arrow.
Then, pull up on the Loading Rack Unit.
Fig. J15
5.2.16.2. Reassembly Notes
1. Alignment of Loading Rack Unit
a. When installing Loading Rack Unit, refer to Reassembly
Notes of "T Loading Arm Unit and S Loading Arm Unit."
5.3. DISASSEMBLY/ASSEMBLY
PROCEDURES OF CASSETTE
UP COMPARTMENT SECTION
5.3.1. Top Plate, Wiper Arm Unit, and
Holder Unit
5.3.1.1. Disassembly Procedure
1. Remove Top Plate by releasing 2 Locking Tabs (A) on the
left side and 2 Locking Tabs (B) on the right side of the Top
Plate.
2. Remove Wiper Arm Unit by releasing 2 Locking Tabs (C).
Then, remove the Holder Unit.
Fig. K1-1
5.3.1.2. Reassembly Notes
1. Alignment of Wiper Arm Unit and Drive Rack Unit
a. Slide the Drive Rack Unit to the far right as indicated by
the arrow.
b. Install the Wiper Arm Unit so that the hole on the Wiper
Arm Unit is aligned with the hole on the Drive Rack Unit.
Fig. K1-2
33
PV-9661 / PV-9662