Advanced Operations
57
Remarks, etc.
Cancelling this Function
Set the [0 LUX OFF/ON] Switch to [OFF].
The [0LUX] Indication disappears.
Cancelling these
Function During
Recording
Press the Recording
Start/Stop Button for
more than 2 seconds
and then set the
[0 LUX OFF/ON] Switch
to [OFF].
Cancelling these
Function During Stand-
by Mode
Set [M.SENSOR] on the
[CAMERA SETUP] Sub-
Menu to [OFF] and then
set the [0 LUX OFF/ON]
Switch to [OFF].
Notes for Recording in Dark Places without
Any Illumination
≥
The built-in Infra-red Beam Emitters light. Be careful
not to cover them with your hand when recording.
≥
Do not use the 0 Lux Night View Function in brightly lit
places and never aim the Movie Camera against the
sun, as this could cause irreparable damage.
≥
The playback picture of scenes recorded with the 0
Lux Night View Function will be in black and white.
≥
If you change the setting of the [0 LUX OFF/ON]
Switch during recording, a switching noise is also
recorded.
≥
When recording in the 0 Lux Night View Function, it is
not possible to adjust the white balance manually or to
cancel the manually adjusted white balance setting.
≥
It is not possible to use any of the Programme AE
Modes when the 0 Lux Night View Mode is activated.
≥
When using the 0 Lux Night View Function, the
subject should be within 3 metres from the Movie
Camera.
≥
When the automatic focusing is not precise, adjust the
focus manually.
≥
If you do not want the Recording Indicating (Tally)
Lamp to light during recording using the 0 Lux Night
View Function, set [TALLY LAMP] on the [OTHER
FUNCTIONS] Sub-Menu to [OFF].
≥
If you use the Macro close-up Function and approach
extremely close to the subject when recording in the 0
Lux Night View Function, the infra-red beam from the
Movie Camera’s built-in Infra-red Beam Emitters may
not reach the subject.
≥
As the iris is fully opened in the 0 Lux Night View
Mode, subjects in white or other light colours may be
recorded whitish, blurred and with weak contrast.
4
Turn the [
34
] Dial to
select [M.SENSOR].
O LUX
OFF
ON
MF/
TRACKING
MF/
TRACKING
3
Turn the [
34
] Dial to
select the [CAMERA
SETUP] and then press
the [SET] Button.
The [CAMERA SETUP]
Sub-Menu appears.
FOCUS / SET
