Menu
96
VQT0N70
Menus related to taking pictures
ª
[H.SHOE MIC]
Set to [LOWCUT] and this reduces low sound
noise and wind noise hitting the stereo zoom
microphone (VW-VMH3E; optional) mounted on
the smart accessory shoe.
ª
[DATE/TIME]
This switches between date and time indications.
≥
The movie camera automatically records the
date and time of picture taking on the tape.
≥
You can also show or change the date/time
indication by repeatedly pressing the [DATE/
TIME] button on the remote control.
ª
[AUDIO REC]
Switches the audio (PCM audio) recording
systems.
[12bit]: Records audio in “12 bit 32 kHz 4 tracks”.
(The original audio signals can be kept
after the other audio signals are dubbed.)
[16bit]: Records audio in “16 bit 48 kHz 2 tracks”.
Audio can be recorded in higher quality.
(If audio signals are dubbed, then the
original audio signals will be erased.)
ª
[REC LAMP]
Set to [ON] and this turns the recording lamp on
during recording, which indicates that recording is
underway. Set to [OFF] and this does not turn on
the lamp even when recording is underway.
ª
[DISPLAY]
Set to [ON] and the display mode can be switched
to all functions. Set to [OFF] and it can be
switched to minimum display.
ª
[BEEP SOUND]
Set to [ON] and confirmation/alarm beeps are
issued as follows.
1 Beep
≥
When you start recording
≥
When you turn on the power
2 Beeps
≥
When you pause recording
2 Beeps for 4 times
≥
When a cassette with its erasure prevention tab
set to [SAVE] is inserted, condensation occurs,
and at other times. Check the sentence
displayed on the screen.
ª
[POWER SAVE]
[OFF]:
When about 5 minutes passed
without any operation, the standby
mode automatically will be set. In
the standby mode, [
;
] blinks and it
takes time more than usual to start
recording after you press the
recording start/stop button.
[5 MINUTES]:When about 5 minutes passed
without any operation, the movie
camera automatically turns off to
protect the tape or to prevent the
battery from running down. When
you use the movie camera, turn it
on again.
≥
In the following cases, the power may not turn
off even when set
[POWER SAVE] >> [5 MINUTES].
≥
When connecting to the AC outlet
(When using the AC adapter)
≥
When connecting the USB cable or the DV
cable to a personal computer or other
equipment
≥
When the PC mode
Menus related to playback
ª
[AV JACK]
This switches among the output settings of the
AV/headphone terminal.
[IN/OUT]: Use this setting when inputting signals
from other equipment via an AV cable
or a S-Video cable.
[OUT/
Ë
]: Automatically switches between AV
and headphone output.
[OUT]:
Use this setting when image or sound
is not output normally to the TV in
[OUT/
Ë
].
≥
When using the headphone, set to [SETUP] or
[BASIC] >> [AV JACK] >> [OUT/
Ë
]. If set to
[OUT], you may hear noises on the right.
ª
[REC DATA]
Set to [ON] and the settings (shutter speed, iris/
gain values, and white balance settings (
-80-
),
etc.) used during the recordings are displayed
during playback.
≥
When the [AUTO/MANUAL/FOCUS] switch is
set to [AUTO], the indication [AUTO] will
appear.
≥
When there is no data, [---] appears on the
display.
≥
If the camera data of the movie camera are
played back on other equipment, the settings
information is sometimes not displayed
normally.
ª
[AUDIO OUT]
This switches the sound to be played back.
[STEREO]: Stereo sound (main sound and sub
sound)
[L]:
Left channel sound (main sound)
[R]:
Right channel sound (sub sound)
GS250GC.book 96 ページ ２００４年１２月１８日 土曜日 午後１時３５分
