Edit mode
90
VQT0N70
ª
Analog/digital conversion
When setting [ADVANCE] >> [DV OUT] >> [ON],
you can output video input from other equipment
in analog form to other digital video equipment
connected through the DV terminal in digital form.
1
Insert the DV cable VW-CD1E (optional)
securely into the DV terminal as far as it will
go.
1) Other equipment (Video equipment, etc.)
2) Movie camera
3) Other digital video equipment
≥
A
Analog signal
Other equipment (Video equipment, etc.)
#
Movie camera
≥
B
Digital signal
Movie camera
#
Other digital video
equipment
≥
When a pause or cue/review playback is
activated on other equipment during analog/
digital conversion, the image may be disturbed
or no image may be presented.
≥
Normally, set [DV OUT] >> [OFF]. If set to [ON],
the image may be disturbed.
Using the DV Cable for Recording
(Digital Dubbing)
By connecting other digital video equipment with
DV terminal and the movie camera by using the
DV cable VW-CD1E (optional)
1
, high-image-
quality dubbing can be done in digital format.
≥
Set to Tape Playback Mode. (Player/
recorder)
1
Connect the movie camera and digital video
equipment with the DV cable.
2
Set [ADVANCE] >> [REC STDBY] >> [YES].
(Recorder)
≥
You do not have to follow this step when the
remote control is used in the digital dubbing.
3
Start playback. (Player)
4
Start recording. (Recorder)
Move the joystick up to select [
¥
/
;
] icon.
Or, while pressing the [
¥
REC] button on the
remote control, press the [
1
] button.
5
Move the joystick up to select the [
¥
/
;
]
icon again or press the [
;
] button on the
remote control to stop recording.
(Recorder)
6
Stop playback. (Player)
1)
2)
3)
DV
1
DV
DV
STOP
V
/REW
STILL ADV
VOL
¥
REC
A.DUB
PLAY
PAUSE
FF/
W
STILL ADV
T
W
GS250GC.book 90 ページ ２００４年１２月１８日 土曜日 午後１時３５分
