Panasonic NV-GS230EB, Operating Instructions Manual

Page: 8 / 64

Before using
8
VQT0T87
Fitting the lens cap
Fit the lens cap to protect the surface of the lens.
If you do not use the movie camera when the MC
protector or the ND filter of the Filter Kit
(VW-LF37WE; optional) is attached to the front of
the lens hood, attach the lens cap to protect the
surface of the lens.
1
Run the end of the lens cap cord through
the hole in the grip belt attachment part and
run the lens cap through the lens cap cord.
≥
The lens cap removed can be hung on the lens
cap fixture.
≥
To fit or remove the lens cap, hold both sides of
the lens cap with the tips of your first 2 fingers.
The grip belt
Adjust the belt length so it fits your hand.
1
Adjust the belt length and the pad position.
1 Flip the belt.
2 Adjust the length.
3 Fix the belt.
Using the LCD monitor
You can record the image while viewing it on the
LCD monitor opened.
1
Put a finger on the LCD monitor open part
and pull the LCD monitor out in the
direction of the arrow.
≥
The viewfinder will go off.
≥
It can open up to 90
o
.
2
Adjust the angle of the LCD monitor as you
prefer.
≥
It can rotate up to 180
o
1 towards the lens or
90
o
2
towards the viewfinder.
≥
The brightness and colour level of the LCD
monitor can be adjusted from the menu.
≥
If it is forcibly opened or rotated, the camera
may be damaged or fail.
≥
Check that the card slot cover is closed.
≥
When the LCD monitor is rotated by 180
o
towards the lens (when recording yourself), the
LCD monitor and the viewfinder will be
simultaneously activated.
1 3
2
1
180
o 2
90
o
GS180_EB.book 8 ページ ２００６年１２月２０日 水曜日 午後９時３９分