53
PROBLEM
POSSIBLE CAUSE
REMEDY
Oven will not turn on.
The oven is not plugged in securely.
Remove plug from outlet, wait 10 seconds and
re-insert.
Main circuit breaker or main fuse is
tripped or blown.
Reset main circuit breaker or replace main
fuse.
There is a problem with the outlet.
Plug another appliance into the outlet to
check if the outlet is working.
Oven will not start cooking.
The door is not closed completely.
Close the oven door securely.
Start
pad was not touched after
programming
Touch
Start
pad.
Another program has already been
entered into the oven.
Touch
Stop/Reset
pad to cancel the previous
program and program again.
The program has not been entered
correctly.
Program again according to the Owner's
Manual.
Stop/Reset
pad has been touched
accidentally.
Program oven again.
"HOT" appears in the display
window.
The cavity is overheated.
Operate again after it cools down.
"COOLING" appears in the
display window.
The fan is operating to cool the electric
components.
The word "COOLING" will disappear after the
fan stops.
The "
" and "LOCK" appears in
the display window.
The Child Lock was activated by tapping
Start
pad 3 times.
Deactivate Lock by tapping
Stop/Reset
pad 3
times.
The oven stops cooking and
"SERVICE" appears in the display
window.
The display indicates a problem with
microwave generation system.
Please contact an authorised Service Center
(see next page).
If "FILL WATER TANK" appear
twice in display window during
cooking, and water tank still
empty, then "U14" will appear.
The water tank is empty.
●
If "FILL WATER TANK" appears in the display
window. Re-fi ll the water tank, position back
in the oven and touch
Start
pad to resume
cooking.
●
If "U14" appears in the display window.
Re-fi ll the water tank, position back in the
oven. Touch
Stop/Reset
pad to reset.
"DEMO MODE PRESS ANY KEY"
or "D" appears in the display
window.
The oven is under demonstration mode.
Tap
Micro Power
pad once,
Start
pad 4 times
and
Stop/Reset
pad 4 times.
Demonstration mode is designed for retail store display. Cooking and other functions will not operate during the demonstration mode. If
it seems there is a problem with the oven, contact an authorized Service Centre.
Before Requesting Service (continued)
See below before calling for service, as most problems can easily be remedied by following these simple solutions:
F0003BU00CP_Eng_170301.indd 53
2017/3/1 15:45:54