36
INTERRUPTING AND CHANGING
THE PROGRAMME
510549
INTERRUPTIONS
Interrupting the programme
process
Press the Start/Pause key to pause/ resume
the programme.
Open door
If the dryer door is opened during the
drying process, the drying cycle will be
interrupted.
When the door is closed and the Start/
Pause key is pressed, the drying will resume
from the point at which it was interrupted.
Full water container
When the water container is full, the drying
programme will be interrupted (indicator 2b
will flash).
Empty the water container (see section
Cleaning and Maintenance).
Press the Start/Pause key to resume the
drying cycle from the point at which it was
interrupted.
Power supply failure
When power supply is restored, the light on
the Start/Pause key will flash.
To resume the drying process, press the
Start/Pause key.
CHANGING THE PROGRAMME/
FUNCTIONS
Press the Start/Pause key and rotate
the programme selector dial to the "Off"
position.
Select another programme/function and
press the Start/Pause key again.
SAVING PERSONAL SETTINGS
Initial settings may be changed. When the
programme and additional functions are
selected, you may store such combination
by pressing the Start/Pause key and
holding it for five seconds.
A signal light on the Start/Pause key and an
acoustic signal will confirm your selection.
S C
(settings changed) will be displayed
briefly on the display.
Press the Start/Pause key to start the
drying process.
The changed combination will appear every
time you switch on the dryer.
Follow the same procedure to change a
previously saved combination.
NH-P8ER1_WGB_En.indd 36
2015/08/24 10:55:58
