33
CLEANING THE HEAT PUMP FILTER
510549
Place an absorbent cloth on the floor in front of the dryer (possible
water spill).
1
Open the outer
cover (hold
the handle on the
left side and pull
downwards).
2
Use the handle
to remove the
heat pump foam
filter.
3
Remove the
heat pump foam
filter from its handle.
Use a damp cloth to
clean the heat pump
housing. Be careful
not to damage the
cooling system.
4
Wash the filter
under running
water. Dry the filter
before replacing it.
When re-inserting the heat pump foam filter ensure the filter
is inserted correctly into the support bed; otherwise, heat
exchanger may be clogged.
Clean the foam filter at least after every five drying cycles.
Do not touch the aluminium fins at the back of the heat pump
filter. Touching the sharp edges may cause injury.
Close the exterior cover (push it upwards towards the
appliance until it snaps back into place).
NH-P8ER1_WGB_En.indd 33
2015/08/24 10:55:58
