30
510549
5. STARTING A PROGRAMME
Press the Start/Pause key.
The Start delay time (if selected), or the time remaining until the
end of the programme will be shown on the display unit.
Indicators next to the selected functions will be lit.
2c
2b
2a
5c
5b
5a
1
6
3
4
6. END OF DRYING CYCLE
A beep sound will indicate the end of the drying cycle. The
indicators will light up and the light on the Start/Pause key will
flash. Signal lamps of additional functions flash intermittently.
2c
2b
2a
5c
5b
5a
1
6
3
4
1.
Open the dryer door.
2. Clean the filters (see section Cleaning ...).
3. Remove the laundry from the drum.
4. Close the door!
5. Switch off the appliance (rotate the programme selector dial
to the "Off" position).
6. Empty the water container.
7. Unplug the mains lead from the mains socket.
After the end of the drying programme, immediately remove
the laundry from the dryer to prevent it from creasing again.
Drying time indicated is based on tests according to the EN
61121 standard and it may change in steps during the drying
process, depending on the load and initial moisture of the
laundry.
NH-P8ER1_WGB_En.indd 30
2015/08/24 10:55:58
