Panasonic NEXTIVA KT-TGP 600 User Manual Download Page 50

Page: 50 / 50

50 | P a g e

Registering the Repeater

After Repeater Mode has been enabled on the Panasonic KX-TGP600 base unit, you can register the
Panasonic KX-A406 repeater to the base unit. Follow the instructions below to do this.

Disconnect

the AC adapter from the repeater, if it is not already.

Press and hold

the handset locator button on the base unit until the status indicator light

flashes

red

, and then release the handset locator button.

Connect

the AC adapter to the repeater.

When the status light on the repeater

flashes red

, press and hold the

PROGRAM

button on the back

of the repeater until the status light and the RSSI/ID light turn

solid

green

If the status light on the base unit is still

flashing red

, press the handset locator button once until

the status light is

solid green

. The repeater is now ready for use.

Transferring a Call between Handsets

While on a call on the Panasonic KX-TPA60 handset, press the

MENU

softkey (middle softkey) at the

bottom of the screen.

Press the

INT

softkey (right softkey) at the bottom of the screen.

Select

the handset you want to transfer the call to. The person you were speaking to is put on hold

while the handset you are transferring the call to rings.

NOTE:

To cancel the transfer and return to the original party, press the

CANCEL

softkey (right

softkey).

When the second party is ready to take the call, press the

XFER/CLR

key to complete the transfer.

NOTE:

Alternatively, you can press the red

POWER/CANCEL

key to complete the transfer.

Summary of Contents for NEXTIVA KT-TGP 600

















































Search results

Summary of Contents for NEXTIVA KT-TGP 600

Reviews:

Panasonic NEXTIVA KT-TGP 600, User Manual, Page: 50 / 50

Search results

Summary of Contents for NEXTIVA KT-TGP 600

Reviews: