Panasonic NEXTIVA KT-TGP 600 User Manual Download Page 34

Page: 34 / 50

34 | P a g e

When finished, press the red

POWER/CANCEL

key to disconnect the call to the party with whom

you are speaking. Press the

HOLD/MSG

key or the green

TALK/Speakerphone

key to return to

the other party.

Accepting a Call

While the Panasonic KX-TPA60 handset is ringing, press the green

TALK/Speakerphone

key to answer

the call.

NOTE:

When a headset is plugged in, the Panasonic KX-TPA60 handset automatically answers in

headset mode. No configuration is needed to make this happen.

Accepting a Second Call

When a call comes in while you are already on the phone, press the

Answer

softkey at the

bottom-left of the Panasonic KX-TPA60 screen. The party you were speaking to is automatically
put on hold, and you are connected to the second party.

NOTE:

Pressing the

HOLD/MSG

key will allow you to switch back and forth between the two

parties.

When finished, press the red

POWER/CANCEL

key to disconnect the call with the party you are

speaking to; then press the

HOLD/MSG

key to go back to the call that was placed on hold.

Terminating a Call

While on a call, press the red

POWER/CANCEL

button to terminate the call. It does not matter whether

you are in handset, speakerphone, or headset mode.

Transferring a Call

Warm Transfer

While on a call on the Panasonic KX-TPA60 handset, press the

XFER/CLR

key. The party you were

speaking to is put on hold, and you hear a dial tone.

Dial the phone number or extension of the party you want to transfer the call to, and press the

CALL

softkey (middle softkey). Wait for the other party to answer, so you can speak to them

before transferring the call.

NOTE:

To instead cancel the transfer and return to the original party, press the

CANCEL

softkey

(right softkey) once if you have not already started dialing and twice if you have. You will not be
able to press the CANCEL softkey if the handset has already started dialing.

Summary of Contents for NEXTIVA KT-TGP 600

















































Search results

Summary of Contents for NEXTIVA KT-TGP 600

Reviews:

Panasonic NEXTIVA KT-TGP 600, User Manual, Page: 34 / 50

Search results

Summary of Contents for NEXTIVA KT-TGP 600

Reviews: