28
How to Clean the Inner Container with Citric Acid
1. Make sure that the mesh filter is attached to the
container.
2. Put citric acid in the inner container.
●
Amount of citric acid to be used at one time
NC-ER30N: 80
N
(two packages)
or seven level tablespoons
NC-ER22N: 40
N
(one package)
or three to four level tablespoons
3. Add water to the maximum water level mark, and mix
the citric acid and water well. Close the lid.
5. Unplug, remove the lid and throw away the hot water
following guideline for throwing away hot water.
6. Refill with water and boil it to remove the smell of
the citric acid. Then throw away the hot water
following the guideline.
●
To remove any discoloration from the area above the
maximum water level, rub the inside lightly with a wet sponge.
●
If the discoloration cannot be removed by rubbing, clean the
inner container several times using citric acid.
Cleaning start
Lights
Cleaning time
NC-ER30N: approx. 41 min.
NC-ER22N: approx. 35 min.
The citric acid is available at an authorized dealer.
* Follow the directions for cleaning printed on the citric acid
package.
* Since the citric acid used for cleaning is a food additive, it is
harmless to humans.
(
Model No:SAN-80N
)
4. Connect the plug immediately after stirring and
press the ‘Select’ key until the indicator light next to
‘Cleaning’ lights up.
208
10hrs
6 hrs
Cleaning
140
Economy
Timer
End of cleaning
Flashes
208
10hrs
6 hrs
Cleaning
140
Economy
Timer
Notice
MA
X. W
ATE
R LE
VEL
最高
水位
MA
X. W
ATE
R LE
VEL
最高
水位
Summary of Contents for NC-ER22N
Page 15: ...12 MAX WATER LEVEL 最高水位 警告 ...
Page 16: ...13 警告 ...
Page 17: ...14 ...
Page 36: ...33 ...