– 8 –
NA-F65B2 / F70B2 / F72B2 / F852B / F902B
Adjust Height of leg
4.3 Install washing machine to steady
4.2 Connect the water supply hose
4.4 Child Lock program
Open lid
Close lid
Buzzer off
Buzzer on
Less than
10 sec.
More than
10 sec.
Press the [ POWER OFF/ON] button for at least
5 seconds. The buzzer sounds (two time for
setting) and the [CHILD LOCK] indication turns
on.
Unplug the power
cord from the
outlet and re-plug
it again after
5 seconds
Buzzer on and
abnormal alarm
Water drain
To raise
To lower
Adjustable leg knob
Adjustable leg
Loosen
Tighten
1. Turn the adjustable leg knob towards (Loosen)
direction to loose it.
2. Turn the adjustable leg to adjust the levelness.
2.1 When increasing height, turn adjustable leg
towards (Loosen) direction.
2.2 When decreasing height, turn adjustable leg
towards (Tighten) direction.
3. Turn the adjustable leg knob towards (Tighten)
direction to tighten it.
Approx. 4 mm
B
[Note]
- Firmly tighten part B of the water tap adaptor,
otherwise water leakage will result.
- When the hose must be reinstalled (after you
remove, for example), turn B to the left until
about 4 mm of the thread becomes visible,
then carry out the procedure described above.
- If a water tap adaptor is already connected,
replace with the attached new one.
Water faucet
Water supply
hose cover
A
B
Screw (4)
Water tap
adaptor
Lever
If the floor is largely inclined
Use board or
a like for prop
up under leg
of washing
machine
