– 13 –
NA-F65B2 / F70B2 / F72B2 / F852B / F902B
Symptoms
Causes
8.2 Symptoms are not trouble.
The water is drained even filled
by a bucket
The water is drained even filled
by a bucket
The buttons do not work.
The water level is too high for
the amount of laundry being
washed.
The water level is too low for the
amount of laundry being
washed.
During draining, the laundry and
the spinner rotates with irregular
movements.
• With light laundry made of synthetic or blended fabric, the water level
will sometimes be lower.
• Do not leave more than 15 seconds while powered on. Fill the water
while powered off or after pushing the start button.
• To suppress soap suds build-up, the washing tub turns slowly and
quickly.
• When there is water in the tub, the operation starts with the draining.
After spin cycle is fi nished, the tub will be filled with water.
Midway during spinning, the
operation suddenly changes to
rinsing.
Water does not flow through the
lint filter. Double Cascade does
not operate.
• Only the [WATER LEVEL] button is available after the machine begins
washing.
• To change the setting, press the [START/HOLD] button or press the
[POWER OFF/ON] button and reconfi gure the setting.
If you start with the rinse cycle,
the tub is not fi lled with water.
• When the laundry amount is large at the HIGH water level, the machine
sometimes fi lls automatically. When level goes down, the machine fi lls
automatically.
• When the laundry is already soaked with water before the wash is
started, or if there is water in the tub before the wash is started, the
water level will sometimes be higher.
• When the laundry is unbalanced during spin, rinsing and automatic
correction of unbalanced laundry will begin. Later spinning will return to
normal condition.
• When the water level is set to very low, water sometimes will not flow
through the lint filter. Double Cascade does not operate when these
setting have been selected.
