Panasonic MKG1500-DE, Installation Instructions Manual

Page: 17 / 115

17
English
Deutsch
Français
Italiano
Nederlands
4-3. Connecting to Home IoT Gateway
Connection of the Home IoT Gateway (MKG100913) to the Power Measuring Unit should be made according
to the app and Home IoT Gateway user manual (https://industry.panasonic.eu/energy-building/home-iot).
4-4. Removing and Exchanging
Caution: When removing and exchanging a Power Measuring Unit, be certain to switch the power connection
breaker and main breaker OFF.
3
Start the measuring unit and check REGISTER LED flashes. Then, hold the SET button (3 seconds or more)
to enter Register mode. During Register mode, REGISTER LED flashes with an interval of 0.5 seconds.
*Do not press SET button during Register mode
1
Check the Home IoT Gateway is available.
2
Carry out the wireless registration process on the Home IoT Gateway side.
For details, see the Home IoT Gateway user manual.
Use the app to confirm that the wireless signal functions with the cover and door closed.
5
Use the app to confirm that the device can measure the power accurately.
6
4
Once communication with the Home IoT Gateway is established, Register mode will end and the
RECIEVE / SEND LED light will illuminate, followed by the REGISTER LED (which will turn off after 5 min).
Insert a flat-head screwdriver into the screwdriver aperture and pull on the power wire.
Use a 2.0 to 3.5 mm flat-head screwdriver.
●
Detaching the Power Supply
When replacing the Power Measuring Unit, follow the replacement of Power Measuring Unit in the app.
●
Exchanging the Power Measuring Unit
V1
V2
V3
VN
3P4W
1P2W
V1
V2
V3
VN
3P4W
1P2W
V1
V2
V3
VN
3P4W
1P2W
Screwdriver
aperture