background image

A

w a r n in g

О  Do not immerse the appliance in  water or splash  it with  water.

(It may cause  an electric shock,  or fire caused by a short circuit.)

•   Do  not disassemble,  repair or modify the appliance.

(It may cause a fire,  electric shock or injury.)

•►Please contact to the service center for the repair.

•   Do  not  insert any objects  in the vent or the gap.

(It may cause an electric shock or malfunction.)

•  Especially metal objects such  as pins or wires.

•   Do not feed food with  hands.  Use the food  pusher.

(It may cause severe injury.)

•   Do not disassemble the appliance or place anything  (especially finger,  spoon,  fork, etc.)

 

in the appliance during operation.

(It may cause severe injury.)

•   Never remove or attach the hopper plate,  head  or cap when the motor is operating.

(It may cause an  injury.)

O

®   This  ap pliance  is  not  intended  for  use by  persons  (including  children)  with  reduced

 

physical,  sensory  or mental  capabilities,  or lack  of experience and  knowledge,  unless

 

they  have been  given  supervision  or instruction  concerning  use of the appliance by a

 

person  responsible for their safety.  Children  should  be supervised to ensure that they

 

do not play with the appliance.

(it may cause a burn,  injury or electric shock.)

•   When  abnormal  or breaking down  occurs,  discontinue using the appliance immediately

 

and  unplug.

(It may cause smoking,  fire or electric shock.) 

e.g.  for abnormal or breaking  down

• The power plug  and the power cord  become abnorm ally hot.
• The power cord  is damaged or power failure.
•  The main  body is deformed or abnormally hot.

♦  Please  unplug the appliance  immediately and contact to the service center 

for the check or the repair.

•   Pay special  attention to hands  or fingers of children  as  they are so small and  can  be

 

involved  into the head or holes of the cutting  plate.

(It may cause severe  injury.)

•   Care shall  be taken when  handling  the sharp cutting  blade.

(It may cause an injury.)

3

Eng

lish

Summary of Contents for MK-ZG1500













Reviews: