GB27
English
Operating with Manual Menu
1
2
After completing the assembly steps, plug-in the plug
into the socket and turn on the Power Switch. The Mode
Indication L.E.D.s will light up and blink.
Select the Continuous mode and adjust the speed with
the Rotary Dial. The more bars are lighted, the higher
the speed. Push the Stop/Start Switch to start the
operation.
3
3
4
During the driving operation, the Stop/Start Indication
L.E.D. will remain lit. Push the Stop/Start Switch to stop
the driving operation.
After the processing is completed, switch off the Power
Switch and unplug from the socket. Remove the Dry Mill
Unit from the Motor Housing and proceed to remove the
ingredients.
Note:
• While removing the ingredients, be careful of the Cutting Blade.
• Do not operate exceeding the rated operation duration (1 min ON, 2 min OFF).
DRY MILL
100_160419_MK-F800_Second_EU(UZ50E153).indb 27
2016/04/19 16:56:51