29
TEMPERATURE RECORDER (OPTION)
5.
Place the recording paper between the guide and the
guide plate. Slide the recording paper along the guide
plate so that the recording paper will not be forced out of
the date/hour slot. See Fig. 5.
6.
After ascertaining that the holes on the side of the
recording paper are locked into the teeth of the sprocket,
turn the gear and send the recording paper into the used
chart compartment.
Setting of time
1.
Turn the gear on the date/hour slot to the desired time.
2.
After properly folding the recording paper in the used or
unused recording paper compartment, replace the
cartridge.
Removing of the used recording paper
After recording, take out the cartridge and remove the
recording paper from the recording paper outlet. If not all
of the recording paper has been fed into the used recording
paper compartment, send all the recording paper in the
compartment first turning the gear.
Battery replacement
To replace the battery, turn the knob counterclockwise to open the lid. Place the battery in the battery
case according to the plus-minus indications on the bottom of the battery case. See Fig. 6.
Note :
This temperature recorder is designed for the manganese dry cell and the alkaline dry cell.
Do not use a rechargeable battery because the initial voltage of such battery is low. The rechargeable
battery may cause the malfunction of temperature recorder or shorten the battery life significantly.
Start-up
1.
The quartz motor is started by placing a “R14” or size “C” dry cell battery in the battery case.
2.
Check the operation of the temperature recorder using the quartz motor rotation check gear.
3.
Replace the battery once a year.
Stopping
The temperature recorder is stopped by taking the battery out of the battery case.
Fig. 5
Fig. 6
